3 Tips to Remember When Doing Fiber Optics Splicing
Fiber optics splicing can be very dangerous if you don’t do it correctly. That’s why it’s a good idea to make sure that you have everything prepared for when you are doing work related to fiber optic cables. Below are three tips that you should remember when you are doing your fiber optics splicing to ensure that it goes well.
Control the Environment – Make sure that you’re using a surface that is stable and flat. Try to avoid moving air. Also, make sure that everything is clean. Thoroughly wipe fiber ends using alcohol and gauze before you cleave them. The surface also should be free of debris and dust.
Be Careful – It can be very dangerous to handle bare fiber. Even the smallest splinters can cause a lot of damage if they get into the blood. Use reverse tape so that you can collect any tiny fibers until they’re able to safely dispose of them.
Measure 3 times & Cut Once – Make sure you’re triple-checking measurements to ensure that everything is the way that it should be. Measure the jacket length you’re stripping from. Check the fiber holders’ alignment and run the ac test on the splicing device to make sure the cleave is good.
These are three tips that you want to remember when it comes to fiber optics splicing. If you aren’t sure how to do it on your own, it’s always better to hire someone else like a fiber optic technician to do it. It can be very dangerous if you get it wrong when it comes to fiber optics equipment.
